Smoother curves
Less stair-stepping on tanks, hoods, and rounded castings.
Print spec · Anycubic resin
20µm Layer Height.
Not the Usual 50µm.
Most hobby resin parts online are printed around 50µm. We run at 20µm — 2.5× finer vertical resolution for sharper detail on HO and N scale parts.
You are paying for detail you can see on the layout — not generic 3D-printed filler.
| What modelers notice | Typical ~50µm hobby resin | 3G @ 20µm |
|---|---|---|
| Layer lines on curves | More visible steps | Smoother arcs and hoods |
| Small detail at N/HO scale | Can mush together | Cleaner separation |
| Prep before paint | More sanding | Less cleanup time |
| Vertical resolution | ~50µm layers | 20µm layers (2.5× finer) |
| Equipment | Often undisclosed | Anycubic resin printing |
Finer micro-detail
Grilles, rivets, and small protrusions stay separated at scale.
Less cleanup
Tighter layers mean less sanding before paint and weathering.